|
Applies to: vehicles with analogue instrument cluster
-
- Fig. 16 Instrument cluster: Consumption display
Resetting values to zero
Press the
button on the multi-function steering wheel and select
On-board computer or
Efficiency program from the menu.
button on the multi-function steering wheel and select
On-board computer or
Efficiency program from the menu.
To reset the figures in the selected memory to zero, press the left thumbwheel -1-
Fig. ►
on the multi-function steering wheel for one second.
Calling up vehicle functions
Call up the first tab (on-board computer) using the
button on the multi-function steering wheel.
button on the multi-function steering wheel.
Press the
button on the multi-function steering wheel and select
Vehicle functions from the menu.
button on the multi-function steering wheel and select
Vehicle functions from the menu.
The equipment installed on your vehicle determines which of the following displays are available:
- On-board computer
,
link►
- Efficiency program
link►
- Digital speedometer
- Assists link►
- Traffic signs link►
- Lap timer link►
- Reduced display
On-board computer
On the on-board computer you can call up the following displays in turn by scrolling the left thumbwheel on the multi-function steering wheel:
- Date link►
- Natural gas engine*: Natural gas quality link►
- Range
- Plug-in hybrid drive*: Rev counter link► , range link► , energy flow display link►
- AdBlue range* link►
- Short-term memory
- Average fuel consumption
- Long-term memory
- Engine oil temperature*
The single journey memory processes the information on a journey from the time the ignition is switched on until it is switched off. If the journey is resumed within two hours after the ignition is switched off, the new figures are automatically included in the calculation.
Unlike the single journey memory, the total journey memory is not erased automatically. In this way, you can determine the period for which you wish the on-board computer to supply driving information.
The following additional display may be available in the on-board computer, depending on the vehicle equipment:
- Active Cylinder Management: The engine automatically shuts down two cylinders when performance demand is low and certain other conditions have been met. This process is imperceptible to the occupants. The driver message 2-cylinder mode will appear if the current or average fuel consumption display Fig. 16► is selected in the instrument cluster. The cylinders are reactivated under heavier load conditions.
Applies to: vehicles with efficiency program
The efficiency program can help to save fuel. It evaluates fuel efficiency data, shows a list of auxiliary equipment affecting fuel consumption, and suggests gear changes. It also provides economy tips for saving fuel.
The efficiency program uses the trip and fuel consumption data from the short-term memory. When you clear the data from the efficiency program, the values in the short-term memory are reset to zero.
The following additional displays are available in the efficiency program, depending on the vehicle equipment:
- Advanced gear-change indicator: The advanced gear-change indicator is based on the same logic as the “regular” gear-change indicator. The “regular” gear-change indicator disappears from the display when the advanced gear-change indicator appears link► .
- Energy consumers: The efficiency program shows a list of energy consumers currently affecting the vehicle s fuel consumption. The display shows up to three energy consumers. The energy consumer drawing the most power appears at the top of the list. If more than three energy consumers are switched on, the ones currently using the most power are displayed. In addition, a scale indicates the overall current fuel consumption of all energy consumers.
- Economy tips: Economy tips will automatically appear intermittently in the efficiency program in certain situations. By following these economy tips, you can save fuel. To clear an economy tip from the display immediately, press any of the controls on the multi-function steering wheel.
Note
The date, the time and the time/date display format can be changed via the infotainment system link►
.