You can enter up to nine stopovers and a final destination in the tour plan.
Important: Navigation mode must be activated Link, a destination must have been entered Link and the input menu must be displayed Fig. 2.
Entering a stopover via the address
Turn the rotary pushbutton to Add stopover and press to confirm.
Enter the stopover Link.
Turn the rotary pushbutton to Set as stopover and press to confirm.
To select the desired position in the tour plan, turn the rotary pushbutton in the required direction and then press it Fig. 1.
Start route guidance by turning the rotary pushbutton to Start route guidance and then pressing the rotary pushbutton. The route criteria and subsequently the map Link will be shown on the MMI display.
Setting a stopover from the map
Press the Map control button. A map will appear on the MMI display.
Select a stopover in the map Fig. 3.
Turn the rotary pushbutton to Set as stopover and press to confirm.
To select the desired position in the tour plan, turn the rotary pushbutton in the required direction and then press it Fig. 1.
Start route guidance by turning the rotary pushbutton to Start route guidance and then pressing the rotary pushbutton. The route criteria and subsequently the map Link will be shown on the MMI display.
Loading a stopover from the memory
Turn the rotary pushbutton to Add stopover and press to confirm.
Select a destination from the list of the destinations last entered Link.
Press the rotary pushbutton. The destination data will be set as a stopover.
To select the desired position in the tour plan, turn the rotary pushbutton in the required direction and then press it Fig. 1.
Start route guidance by turning the rotary pushbutton to Start route guidance and then pressing the rotary pushbutton. The route criteria and subsequently the map Link will be shown on the MMI display.
To delete all stopovers from the tour plan, turn the rotary pushbutton to Enter single destination and confirm the message on the MMI display by selecting Yes.
Note
If you would like to change your route/tour plan, no problem! Simply use the rotary pushbutton to select the destination or stopover and then press the rotary pushbutton. You can then drive to this destination now, change, move or delete the destination/stopover.