- Fig. 1 Headlight unit: Bulb for turning light
- Fig. 2 Headlight unit: Bulb for turning light
- Fig. 3 Headlight unit: Cover (highlighted)
Applies to vehicles: with xenon headlights and turning light
Removing bulb
Pull the headlight forwards Link.
Release the retaining clips (top and bottom) and remove the cover Fig. 3 WARNING!. The wiring remains on the cover.
Press the plastic connector from the side -arrow- Fig. 1.
Remove the plastic connector together with the bulb from the headlight housing.
Disconnect the plastic connector from the base of the bulb.
Installing bulb
Push the new bulb into the plastic connector so that it is securely seated WARNING!.
First fit the plastic connector with the new bulb into the bottom of the headlight housing Fig. 2. Make sure the tab -A- points vertically upwards.
Then press the plastic connector into the headlight housing in the direction indicated by the arrow until it is seated securely.
Re-attach the cover and fasten the retaining clips (top and bottom).
Install the headlight Link.
Check whether the new bulb is working.