- Fig. 1 Headlight unit: Bulb for side light/daytime running light
- Fig. 2 Headlight unit: Bulb for daytime running light
- Fig. 3 Headlight unit: Cover (highlighted)
Applies to vehicles: with halogen headlights
Removing bulb
Pull the headlight forwards Link.
Pull out the bulb holder -arrow- Fig. 1 or Fig. 2 Link. A protrusion on the bulb holder facilitates the bulb change -arrow- Fig. 2.
Replace the defective bulb Link.
Installing bulb
Fit the bulb holder with the new bulb back into the headlight unit.
Re-attach the cover and fasten the retaining clips (top and bottom*).
Install the headlight Link.
Check whether the new bulb is working.
Note
If necessary, the control motor Fig. 2 can be rotated upwards by approx. 45 ° -1- to gain better access to the bulb holder. The control motor must be returned to the initial position -0- to fit the cover.