-
- Fig. 1 Google earth map with legend menu switched off
-
- Fig. 2 Standard map with legend menu switched on
Applies to vehicles: with car telephone kit and mobile phone with
SIM Access Profile
Important: Navigation mode must be activated
Link, and the requirements for online services must be met
Link.
Press the control button for Settings.
Turn the rotary pushbutton to Map display
and press the rotary pushbutton.
To display the standard map view, turn the rotary pushbutton to
Standard and press the rotary pushbutton.
To display the map with satellite pictures, turn the rotary pushbutton
to Google earth and press the rotary
pushbutton.
Google earth map display
For this map display the system uses data packets received online
in the form of satellite pictures and combines these pictures
with the road network from the Standard
map display. The MMI hard drive has a memory capacity of 2 GB
for storing the map/navigation data received online (corresponds
to map/navigation data for route guidance for about 4000 km).
You can also use the loaded satellite pictures for route guidance
without an active data connection as long as these pictures
are stored on the hard drive.
You can use the Google earth map contents, such as
Panoramio or
Wikipedia, to display
Additional information on landmarks
or special destinations
Link. To do so, move the crosshairs onto a map content and
tap the MMI touch pad*. In the
Additional information menu, you
can now look at pictures of landmarks or special destinations,
for example.
Standard map display
You can choose from four different map types for the map display
on the MMI screen
Link.
How to use the map / map contents
When the map display with legend menu is deactivated, you can
zoom in and out of the map by turning the rotary pushbutton
anti-clockwise or clockwise. To select a town, move the crosshairs
on the map with the rotary pushbutton
Link/MMI touch pad*
Link.
You can switch on the legend menu by pressing the rotary pushbutton.
Now you can call up further functions by turning and pressing
the rotary pushbutton
Fig. 2.
You can exit the legend menu by pressing the
BACK button.
| -1- | Orientation: The map is displayed either facing north or facing the direction of travel Link. If you change the map orientation setting and press the rotary pushbutton when the position 2D map type Link and the legend menu are activated, the orientation is changed from dir. of travel to north and vice versa. This setting is stored. |
| -2- | Scale: Turn the rotary pushbutton clockwise/anti-clockwise to zoom in or out. |
| -3- | Distance to destination/stopover |
| -4- | Calculated time of arrival at destination/stopover |
| -5- | Speed display1) |
| -6- | Altitude display |
| -7- | Location of the vehicle |
| -8- | Display of selected additional map information |
| -9- | Display of position coordinates of the crosshairs (longitude/latitude) |
| -10- | Moving along the route: This function can be used while route guidance is activated. Turn the rotary pushbutton clockwise/anti-clockwise to move the map along the current route. |
| -11- | Destination details menu: If available, details on the point selected with the crosshairs are displayed (e.g. address). The point on the map selected with the crosshairs can be set as a destination or stopover, stored in the directory and called up on the telephone Link. |
| -12- | Repetition of the last route guidance cue |
| -13- | Examples of selected map contents |
| -14- | Additional information on the point selected with the crosshairs: If you use the crosshairs to select a point on the map, any existing information on this location (e.g. address, phone number or traffic message) will be displayed. |
Note
- Online services are only available if you have a mobile phone contract that includes a data option and if you are in an area with mobile phone network coverage. Depending on your mobile phone tariff, you may be charged for receiving data packets online, especially if you are using the system abroad: We strongly recommend that you use a data flat rate. For more information, contact your service provider.
- Did you know that you can choose from four different map types Link?
- You can delete the data stored from the Google earth map display Link.
- Google earth is an online service that is updated at regular intervals when it is called up. This can take a few seconds.
- When the Google earth map display is switched on and the position 3D map type is selected, the MMI display automatically switches to the position 2D map while you are driving through a tunnel.
1) Applies to vehicles without camera-based
speed limit display only.