-
- Fig. 1 Bluetooth symbol
Applies to vehicles: with car telephone kit or phone pre-installation
You can connect mobile phones and the handset*
or Bluetooth audio players to the MMI system via Bluetooth.
Press the function selector button marked TEL.
Press the control button for Settings.
Turn the rotary pushbutton to Bluetooth
and press the rotary pushbutton. The Bluetooth
menu will appear on the MMI display
Fig. 1.
Bluetooth on/off
You can switch the Bluetooth function of the MMI system
on or off.
When this function is on, the Bluetooth
symbol -1-
Fig. 1
will appear on the MMI display.
Discoverability
The discoverability of the MMI system for the mobile phone/handset*
or Bluetooth audio player can be switched
on/off.
If you select auto, the MMI system
can be discovered by mobile phones/the handset*
or a Bluetooth audio player for a period of about five minutes
while the car is stationary and the ignition is on. Discoverability
is switched off after this period. Mobile phones or players
which have already been bonded can connect via Bluetooth even
when discoverability is deactivated. Once you have bonded your
mobile phone, you should switch this function
off to prevent your car telephone
from being discovered by third parties.
When audio files are played via a bonded Bluetooth audio player,
the discoverability option of the MMI system is automatically
switched off; otherwise the files
might not be played properly.
Bluetooth audio player
You must switch the Bluetooth audio player
function on before you can select
Bluetooth audio player as the source
in media mode
Link .
To avoid problems while using the telephone, switch the
Bluetooth audio players function
off when you are not using the
audio player.
Find Bluetooth devices
All Bluetooth devices within range are found and displayed in
a list.
Bonded Bluetooth devices
All Bluetooth devices bonded to the MMI system are displayed
in a list. The Bluetooth device that is currently connected
is marked with the Bluetooth symbol.
To delete bonded Bluetooth devices one at a time, select a device
and delete it by selecting the function
Delete Bluetooth device.
When mobile phones are connected, you can switch between the
SIM Access Profile (Car phone),
the Handsfree Profile and the
Audio player profile by selecting
the Bluetooth device and changing the profile via the function
Connect (the vehicle must be stationary).
Use the function Disconnect to
disconnect the device currently bonded.
Known Bluetooth devices
Up to 50 known devices are displayed in a list. These Bluetooth
devices may no longer be within range when you try to re-connect
them.
Bluetooth name
The name of your car telephone kit's vehicle base station (e.g.
"AUDI MMI 2613") is displayed and can be changed.
Delete external Bluetooth devices
All bonded Bluetooth devices can be deleted by confirming with
Yes. Bonded handsets*
(e.g. "AUDI BTHS") have to be deleted one at a time.
Note
- You can bond several mobile phones to the MMI system; however only one connection is active at a time.
- When you reconnect a Bluetooth device that has already been bonded to the MMI system, the Bluetooth profile that was last activated (Car phone, Handsfree or Audio player) is connected first.