- Fig. 1 Headlight unit: Handle secured in place with side light/daytime running light
- Fig. 2 Headlight unit: Cover for dipped headlight
Applies to vehicles: with halogen headlights
Removing bulb
Pull the headlight forwards Link.
Press the handle slightly into the bulb carrier and turn it anti-clockwise.
Remove the handle with the defective bulb.
Installing bulb
Fit the new bulb, pressing it into the bulb holder and turn it clockwise as far as it will go.
If necessary, use a cloth to remove any fingerprints from the glass part of the bulb.
Fit the handle with the new bulb back into the headlight.
Fit the cover again.
Install the headlight Link.
Check whether the new bulb is working.