-
- Fig. 1 Headlight (rear view): Cover for turn signal
-
- Fig. 2 Bulb housing: Removing bulb for turn signal
Applies to vehicles: with xenon headlight bulbs
Removing bulb for turn signal
Remove the headlight Link.
Take the screwdriver handle and the interchangeable Torx bit out of the vehicle tool kit Link.
Remove the bolts -arrows- Fig. 1 and detach the cover.
Take hold of the black plastic connector and pull the bulb out of the headlight housing -1- Fig. 2.
Installing bulb for turn signal
Push the new bulb into the black plastic connector so that it is securely seated WARNING!.
If necessary, use a clean cloth to remove any fingerprints from the glass part of the bulb.
Carefully insert the bulb into the headlight housing so that you feel the plastic connector engage.
Bolt on the cover Fig. 1.
Re-install the headlight Link.
Caution!
Make sure that the cover is correctly seated to ensure that water cannot enter the headlight housing and to prevent the headlight from malfunctioning.