-
- Fig. 1 Bulb housing: Removing bulb for turn signal
-
- Fig. 2 Bulb housing: Removing the bulb
-
- Fig. 3 Headlight: Cover for turn signal
Applies to vehicles: with halogen headlights
Removing
Take off the cover Link.
Press the defective bulb gently into the bulb carrier, then turn it anti-clockwise -1- Fig. 2 and remove it from the holder -2-.
Installing
Fit the new bulb by pressing it into the bulb holder and turning it clockwise until it engages WARNING!.
If necessary, use a clean cloth to remove any fingerprints from the glass part of the bulb.
Install the bulb holder.
Fit the cover back on and turn it clockwise as far as the stop Fig. 3.
Re-install the headlight Link.
Caution!
Make sure that the cover is correctly seated to ensure that water cannot enter the headlight housing and to prevent the headlight from malfunctioning.