What you must do after changing a wheel.
Put the tools and jack back in the luggage compartment.
Place the wheel with the defective tyre in the luggage compartment and secure it.
Check the tyre pressure of the newly fitted tyre as soon as possible.
Have the tightening torque of the wheel bolts checked as soon as possible with a torque wrench. The correct tightening torque is 120 Nm.
Note
- If you notice that the wheel bolts are corroded and difficult to turn when changing a wheel, they must be replaced before having the tightening torque checked.
- In the interest of safety, drive at moderate speeds until the tightening torque of the wheel bolts has been checked.
- On Audi A1s with tyre pressure monitoring system*, the new tyre pressures must be stored after changing a wheel Link.