Applies to Audi A1s: with driver information system
Quartz clock
The date, time and display format can be changed using the sound system* or MMI* control console. Please refer to the sound system* or MMI* Operating Manual for more details. You can also adjust the settings using the SET button Link.
GPS-controlled clock*
When the clock is in "GPS" mode, the signal reception symbol (a satellite dish) appears in the display. The time and date should not be changed manually.
You can switch between the quartz clock and GPS modes by changing the settings on the sound system* or MMI*.
Note
- The time, date, recorded mileage and outside temperature will be displayed for about 30 seconds after you switch off the ignition or open the driver's door.
- When the ignition is switched off, the clock and date display can be switched on for about 30 seconds by pressing the SET button Fig. 2.