|
Applies to: vehicles with neck heating
The neck heating works when the engine is running.
The neck heating has three levels. The neck heating is switched on when you turn the knob clockwise Fig. 70►. The LEDs above the seat symbol indicate the blower level. To reduce the blower level, turn the knob anti-clockwise. To switch off the neck heating, turn the knob anti-clockwise until all the LEDs have gone out.
The neck heating automatically switches from level 3 to level 2 after about 6 minutes when the soft top is closed.
WARNING
- People with limited capacity to feel pain or sense temperature could burn themselves when using the neck heating. These people must not use the neck heating - risk of injury!
- If the air outlets in the seat Fig. 69► are covered by items of clothing or similar while the neck heating is on, the air that emerges immediately afterwards can be very hot. This could cause burns to bare skin in the immediate vicinity of the air outlets.
Note
- The blower output is always lower when the soft top is closed than when it is open.
- The power management system link► may reduce the temperature in certain situations if the battery voltage is too low.