If necessary, the engine can be started by connecting it to the battery of another AudiTT.
If the engine fails to start because of a discharged battery, the battery can be connected to the battery of another AudiTT to start the engine. Suitable jump leads are required.
Both batteries must be rated at 12 Volts. The capacity (Ah) of the booster battery should not be significantly lower than that of the discharged battery.
Jump leads
The jump leads must be heavy enough to carry the starter current. Refer to the details given by the manufacturer.
Only use jump leads with insulated battery clamps.
Positive cable – usually red.
Negative cable – usually black.
WARNING
- When it is discharged the battery can freeze at temperatures around 0°C. A frozen battery must first be thawed out before connecting the jump leads, as it could otherwise explode.
- Note the safety warnings referring to working in the engine compartment link►.
Note
- There must be no contact between the two AudiTTs as otherwise current could flow as soon as the positive terminals are connected and the boosting battery could be discharged.
- The discharged battery must be properly connected to the AudiTT s electrical system.
- Switch off the car telephone if necessary. Details will be given in the manufacturer s instructions for the car telephone.