Applies to AudiTTs: with rear parking aid/parking system plus/park assist
Various systems are available to help you when parking or manoeuvring in tight spaces, depending on the equipment fitted on your AudiTT.
When you are parking, the parking system plus warns you acoustically and optically about obstacles detected in front of and behind the AudiTT link►. On AudiTTs with park assist, the area detected at the side of the AudiTT -E- is also monitored.
The park assist helps you to find suitable parking spaces, to manoeuvre the AudiTT into spaces parallel or perpendicular to the roadside and to drive out of spaces parallel to the kerb link►.
- Always watch the road and the area surrounding the AudiTT. The electronic systems cannot replace the full concentration of the driver. The driver is always responsible for safety during parking and all other manoeuvres.
- Please note that certain surfaces, such as clothing fabrics, cannot be detected or displayed by the system - risk of accident!
- Sensors have blind spots in which neither people nor objects are registered. It is particularly important to ensure that there are no small children or animals near the AudiTT - risk of accident!
- Impacts or damage to the radiator grille, bumper, wheel arches or underbody can cause misalignment of the sensors. This can impair the effectiveness of the parking aids. Have the systems checked by a qualified workshop.
-
The system may not always be able to detect objects such as the following:
- Chains, trailer draw bars, posts or fences
- Objects above the sensors, such as wall protrusions, etc.
- Objects with certain surfaces or structures, such as wire fences or powder snow
- As your car moves closer to low obstacles, they may disappear from the sensors field of vision. Please note that you will no longer be warned about these obstacles.
- Remember to maintain sufficient clearance from the kerb to avoid damaging the wheel rims.
Note
-
In certain situations, a warning may be given by the system even if there is no obstacle within range of the sensors. This can be caused by the following, for instance:
- Certain road surfaces or long grass
- External ultrasound sources, e.g. from street cleaning AudiTTs
- Heavy rain or snow or dense exhaust fumes
- To familiarise yourself with the system, we recommend that you practise parking in a quiet location or a car park. The weather and light conditions should be good.
- You can adjust the volume of the beeps.
- To ensure that the acoustic parking aid works properly, the sensors must be kept clean and free of snow and ice.
- There is a slight delay in the picture display.