Please note the following in order to prevent damage to the AudiTT when driving through water (e.g. on flooded roads):
- The water level must not be higher than the AudiTT s underbody.
- Do not drive faster than walking pace.
After driving through water, mud, sludge, etc., the braking effect can be delayed slightly due to moisture on the discs and brake pads. Applying the brakes carefully several times will remove the moisture and restore the full braking effect.
CAUTION
Parts of the AudiTT (e.g. engine, gearbox, running gear or electrical components) can be badly damaged when driving through water.
Note
- It is advisable to check the depth at the deepest point before approaching the water.
- Do NOT stop the AudiTT, drive in reverse or switch off the engine before you are out of the water.
- Bear in mind that waves created by oncoming traffic could exceed the permissible wading depth of your AudiTT.
- Avoid driving through salt water (corrosion).