A new vehicle should be run in over a distance of 2,500 km. During the first 1,000 km do not use full throttle and do not exceed an engine speed of 6,000 rpm. From 1,000 to 2,000 km you should also avoid using full throttle and keep the engine speed below 7,000 rpm. From 2,000 to 2,500 km you can then increase engine speed gradually and briefly up to the maximum permissible engine speed.

During its first few hours of running, the internal friction in the engine is greater than later on when all the moving parts have bedded down.

How the vehicle is driven for the first 2,500 km also influences the engine quality. After this period you should continue driving at moderate engine speeds, in particular when the engine is cold. This helps to reduce wear and tear on the engine and increases the potential mileage which can be covered by the engine.

You should also avoid driving with the engine speed too low. Change down to a lower gear when the engine no longer runs "smoothly". Excessively high engine speeds are prevented by an automatic rev limiter.