Applies to vehicles: with hill hold assist
The hill hold assist function makes it easier to drive away on a slope.
Important: The driver's door must be closed and the engine must be running.
The system is activated when you press and hold the brake pedal while the vehicle is stationary.
When you release the brake pedal the braking force will be maintained for a moment in order to hold the vehicle and make it easier for you to drive away.
WARNING!
- The intelligent technology in the hill hold assist function cannot defy the laws of physics. Do not let the extra convenience afforded by the hill hold assist function tempt you into taking any risks when driving – this can cause accidents.
- The hill hold assist function cannot keep the vehicle stationary in all conditions on a gradient (e.g. if the road is slippery or icy).
- If you do not drive away immediately after releasing the brake pedal the vehicle could start to roll back. You should therefore immediately press the brake pedal or apply the parking brake.
- If the engine should stall you must immediately press the brake pedal or apply the parking brake.
- If you are driving away on a slope in stop-and-go traffic, press and hold the brake pedal for a few seconds while the vehicle is still stationary to prevent it from rolling back down the slope when you drive off.
Note
To find out whether your vehicle is equipped with the hill hold assist function please contact an Audi dealership or qualified workshop.