Audi R8 Version year 2015 Telephone settings

Instruction book Audi R8 Version year 2015

►Audi R8 Coupé ►Infotainment ►Telephone ◀Other settings

Select: MENU button > Telephone > right control button > Telephone settings.

Call options^*

Call forward: Forwarding of incoming calls to your mailbox or to another phone number can be switched on/off. You can use Check status to check whether this function is activated or deactivated.

Call waiting:If this option is activated

, you will be informed of incoming calls when you are on the phone. You can use Check status to check whether this function is activated or deactivated.

Transmit caller ID: Sending your telephone number in outgoing calls can be activated/deactivated. With the Network-dependent option, the setting agreed in your mobile network service contract will be used. The settings apply only to the Telephone menu in the MMI system. When the Bluetooth connection has been terminated, the settings of your mobile phone apply. You can use Check status to check whether this function is activated or deactivated.

Bluetooth settings

Refer to link►.

Data connection settings^*

Refer to link►.

Telephone mode^*

On vehicles with a car telephone kit, you can choose between three different telephone modes to optimise the network response:

Automatic: The car telephone automatically switches between the GSM (2G), UMTS (3G) and LTE networks. This depends on the network, the network reception, and the position of the vehicle. In this mode, there might be restrictions when using Google Earth or Wi-Fi.
Telephony optimised: The car telephone kit registers with the GSM network (2G). In this mode, the reception is prioritised for making and receiving calls. There may be restrictions when using Google Earth or Wi-Fi.
Data service optimised: The car telephone registers with the GSM (2G), UMTS (3G) or LTE network. This depends on the network, the network reception, and the position of the vehicle. In this mode, the reception is prioritised for the use of data services. There may be restrictions when making and receiving calls.

If you select the telephone mode Automatic or Telephony optimised, there may be network restrictions if you try to use Audi connect services^* and make telephone calls at the same time.

Ring tone and volume settings1)

You can switch the MMI ring tone on or off using the Mute telephone function. Ring tones are played when you select the function Ring tone. Press the rotary pushbutton to store the selected ring tone. You can adjust the Microphone input level during an active phone call using the rotary pushbutton. For the settings Ring tone volume/Message volume, see link►.

Network settings^*

Refer to link►.

Serial number (IMEI)^*

The serial number of the telephone module installed in the MMI system is displayed.

Switch on telephone/Switch off telephone

The car telephone will be turned “on” automatically when the ignition is switched on, as long as it was not switched off separately the last time it was used.

Note

You can bond several mobile phones to the MMI system; however only one connection is active at a time.

All bonded Bluetooth devices can be deleted by resetting the Bluetooth function to the factory settings link►.

If you select the telephone mode Automatic or Telephony optimised, there may be network restrictions if you try to use Audi connect services^* and make telephone calls at the same time.

◀back