|
Applies to: vehicles with xenon headlights
Removing
Press the plastic connector with the bulb upwards Fig. 363►.
Remove the connector from the headlight housing with the bulb.
Disconnect the connector from the base of the bulb.
Installing
Push the new bulb into the connector so that it is securely seated ►.
Guide the connector with the bulb into the housing.
First fit the connector with the new bulb into the bottom of the housing Fig. 364►. Make sure the tab -A- points vertically upwards.
Then press the connector into the housing in the direction indicated by the arrow until it is seated securely.
Put the cover back on.
Check whether the new bulb is working.