Applies to: vehicles with rear parking aid/parking system plus/reversing camera/surround view cameras/park assist
You can change the settings for these functions on the infotainment system.
Select the following on the infotainment system: MENU button > Car > left control button > Driver assist > Parking aid. Or:
Select the right control button* on the infotainment system when the parking aid is activated.
End* - To cancel the parking aid
Activate automatically* - To switch automatic activation on/off
Front volume* - Volume for the front and side* zones
Rear volume - Volume for the rear zone
In-car entertainment fader - The volume of the current audio or video source is reduced when the parking aid is switched on.
You will hear a short tone each time you make a new setting.
View* - To switch between the graphic display ( graphic) and camera image ( camera) on the right of the display.
Trailer view* - To display the trailer view
Auto switch-over front/rear* - The rear view (directly behind the vehicle) is automatically shown when you select reverse gear. The front view (directly in front of the vehicle) is automatically shown when you select a forward gear. The front corner view ( Corner (front)) is displayed the first time you press the 
button in a forward gear to activate the system.
button in a forward gear to activate the system.
If you do not tick the box 
, the rear view (directly behind the vehicle) is always shown when you switch on the system; the front view is not automatically shown when you select a forward gear.
, the rear view (directly behind the vehicle) is always shown when you switch on the system; the front view is not automatically shown when you select a forward gear.Note
- Some of the menus can only be called up via the right control button when the parking aid is activated.
- The volume and automatic activation* settings are automatically stored and assigned to the remote control key in use.