Applies to: vehicles with plug-in hybrid drive
Please also familiarise yourself with the warning lamps described on link► onwards.

There is a malfunction in the plug-in hybrid system. The brake servo and the power steering system could stop working. Stop your vehicle immediately in a safe place in the open, keeping a safe distance from buildings, overhanging roofs, carports or other structures. Switch off the ignition. You should have the malfunction repaired by a qualified workshop.

The coolant level is too low or the coolant temperature is too high.
Stop your vehicle without delay in an outdoor area as soon as it is possible to do so safely. Switch off the ignition.
If the coolant level is correct, the fault may be the result of overheating in the system. Wait a while until the vehicle s electrical system cools down.
If the warning lamp goes out after the system has cooled down and you have switched the ignition on again, you can continue driving. Contact a qualified workshop without delay and have the fault rectified.
If the warning lamp does not go out, please contact a qualified workshop.

There is a malfunction in the plug-in hybrid system. Drive to a qualified workshop and have the fault rectified.

If the indicator lamp lights up and the message appears, the fuel tank is empty. Drive to a filling station without delay.
If the indicator lamp
also lights up, there may be a fault in the engine management system. The engine power will be reduced. Drive to a qualified workshop without delay and have the fault rectified.


This driver message appears if the conditions for electric driving are not fulfilled.