The rear towline anchorage should only be mounted if you wish to tow another vehicle.
The screw connection for the towline anchorage is located behind a cover on the right side of the rear bumper.
Take the towline anchorage out of the vehicle's tool kit Link.
To detach the cover cap from the bumper firmly press the outer part of the cap inwards to release it Fig. 1.
Screw the towline anchorage firmly all the way into the screw connection Fig. 2.
After use, unscrew the towline anchorage and fit the cover cap back on the bumper. Put the towline anchorage back in the vehicle's tool kit. The towline anchorage should always be kept in the vehicle.
WARNING!
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing (accident risk).