- Fig. 1 Collapsible spare wheel with compressor
- Fig. 2 Open driver's door (LHD vehicle): Sticker listing tyre pressures
Applies to vehicles: with collapsible spare wheel
Take the compressor out of the luggage compartment Fig. 1.
Unscrew the valve cap from the collapsible spare wheel.
Screw the compressor tyre filler hose onto the tyre valve of the collapsible spare wheel.
Plug the connector of the compressor into one of the vehicle's sockets Link.
Switch on the compressor.
Run the compressor until the tyre pressure reaches the value listed on the tyre pressure sticker Fig. 2. Turn the compressor off after 12 minutes at the latest (risk of overheating).
Screw the valve cap back onto the valve.
WARNING!
The compressor and the tyre filler hose can become very hot during operation (risk of burns).
Caution!
Turn the compressor off after 12 minutes at the latest (risk of overheating). Allow the compressor to cool down for a few minutes before using it again.
Note
Do not connect the compressor to the cigarette lighter socket as it will not provide the necessary power level.