- Fig. 1 Rear backrest (second row of seats): Top tether anchorages
- Fig. 2 Rear backrest (third row of seats*): Top tether anchorages
- Fig. 3 Second row of seats: Securing child seat with ISOFIX
Applies to vehicles: with top tether anchorages
Fold or push up the head restraint behind the child seat.
Push the mountings on the child seat into the ISOFIX anchorages until they engage audibly Fig. 3.
Pull on the child seat to check whether both sides have engaged properly.
Guide the top tether strap of the child seat underneath or past both sides of the head restraint (depending on the type of child seat) towards the rear and into the luggage compartment.
Second row of seats: Push the floor panel in the luggage compartment slightly towards the rear to access the top tether anchorage Fig. 1.
Third row of seats*: Remove the cover using a screwdriver (from the vehicle's tool kit) to access the top tether anchorage Fig. 2.
Hook the strap into the top tether anchorage.
Pull the tether strap tight so that the top of the child seat rests securely against the backrest.
Second row of seats: Push the floor panel back again.
Note the information in the instructions provided by the child seat manufacturer.
- The anchorages in the vehicle are designed only for child seats with ISOFIX and top tether. Do not attempt to secure other types of child seat, seat belts or other objects to these anchorages - this could result in serious or possibly fatal injury.
- Only one child seat should be attached to each top tether anchorage.