Applies to vehicles: with folding luggage compartment cover
Folding open
Open out the two sections of the cover Fig. 1 -D-.
Allow the two sections to engage in one another.
Installing
Insert the two mounting adapters into the notches in the side trims and press down the catch.
Insert the cover into the mounting adapters.
Press down the cover until you hear it engage.
Hooking into place
Hook the front of the cover into the securing rings on the backrest Fig. 2 -1-.
Release the rear rod from the front rod Fig. 1 -A-.
Hook the ends of the rod into the securing rings in the side trim Fig. 2 -2-.
Disengaging
Pull the cover out of the securing rings on the backrest and in the side trim.
Secure the rear rod to the front rod.
Removing
Push the cover slightly towards the front in order to release it from the mounting adapter.
Lift out the cover.
Pull the catch and remove the mounting adapters.
Folding closed
Pull the two release tabs apart in the direction of the arrow Fig. 1 -B-.
Fold up the two sections of the cover -C-.
WARNING!
The luggage compartment cover should not be used as a storage shelf. Items placed on this cover could cause injury in an accident or if the brakes are applied suddenly.
Caution!
The two inner securing rings on the left and right side of the backrest Fig. 2 -1- are not suitable for securing loads (risk of damage). These securing rings are only intended for securing the luggage compartment cover.
Note
To prevent any risk of damage, always put the luggage compartment cover and the two mounting adapters away in the bag provided when not in use.