Before carrying passengers on the rear seats, fold the head restraints on the occupied seats up / slide the centre head restraint up at least one notch.
Adjusting outer head restraints
To fold down the head restraint, pull the tab Fig. 1.
To fold up the head restraint, swivel it up until you feel it click into place.
Adjusting centre head restraint
To raise the head restraint, take hold of it on both sides and move it up until you feel it click into place at the desired position Fig. 2.
To lower the head restraint, press the button -arrow- and slide the head restraint downwards.
Removing centre head restraint
Push the head restraint upwards as far as it will go.
Press the button -arrow- and pull the head restraint out of the backrest WARNING!.
Installing centre head restraint
Push the posts of the head restraint into the guides until you feel them click into place.
Press the button -arrow- and push the head restraint all the way down. It should no longer be possible to pull the head restraint out of the backrest.
- Remove the head restraint only if this is necessary in order to attach a child seat Link. Install the head restraint again immediately after removing the child seat. Travelling with the head restraints removed or incorrectly adjusted increases the risk of severe injuries.
- The head restraints on the outer seats of the second row must be in the raised position when you have passengers sitting in the third row of seats* (risk of injury).