- Fig. 1 Windscreen wiper lever: On-board computer controls
Applies to vehicles: with on-board computer
The on-board computer is controlled by means of two switches on the windscreen wiper lever.
To switch between the different on-board computer memories, keep pressing the RESET button -B- Fig. 1 until the desired memory appears.
Press the top or bottom of the function selector switch -A- to page through the trip data in the memory.
The on-board computer is only available when the ignition is on. When the ignition is switched on, the display shows the function that was last selected.
As well as the figures from the on-board computer (memories 1 and 2 and efficiency programme*), the display can also show information from other systems. Press the RESET button -B- briefly to switch back and forward between these displays.
Resetting figures to zero
To clear the values in the single journey or total journey memory, select the required function and press the RESET button -B- for at least one second. You can also cancel the values on the MMI Link.
If you cancel the values in the single journey memory all values currently displayed in the efficiency programme* are also reset.
Note
The information in the memory is cancelled if the battery is disconnected.