Applies to: vehicles with S tronic gearbox
The launch control programme gives you optimum acceleration when starting from a standstill.
Important: The engine must be warm and the steering wheel must be pointing straight-ahead.
Deactivate the start/stop system * link►.
The LED in the
button will light up.
Deactivate the hold assist* link►.
The LED will go out.
Briefly press the
OFF button link► while the engine is running. The indicator lamp
will light up and the message Stabilisation control (ESC): offroad. Warning! Restricted stability will appear on the instrument cluster display.
Briefly pull the selector lever back from position D/S to select position S or select dynamic mode in drive select* link►.
Press the brake pedal firmly with your left foot and hold it down for at least one second.
At the same time, press the accelerator all the way down with your right foot until the engine revs are high and steady.
Take your foot off the brake within 5 seconds ►.
- Always adapt your driving style to the traffic conditions.
- Only use the launch control programme when road and traffic conditions permit, and make sure your manner of driving and accelerating the vehicle does not inconvenience or endanger other road users.
- Please note that the driven wheels may start to spin when the off-road mode is switched on, causing the vehicle to lose grip, in particular on slippery or wet roads – danger of skidding!
- When acceleration has been completed, you should deactivate the off-road mode again by briefly pressing the OFF button.
Note
- Some vehicle components may be hot after accelerating with the launch control. In this case, the function may not be available for several minutes. This is to avoid damage. The launch control will be available again after a cool-down period.
- Accelerating with the launch control programme places a heavy load on all parts of the vehicle. This can result in increased wear and tear.