|
Resetting values to zero
Important: The consumption, short-term memory or long-term memory display must be selected.
To reset the figures in the selected memory to zero, press the left thumbwheel on the multi-function steering wheel for one second. Or:
On the multi-function steering wheel, select right control button > Reset values*.
On the on-board computer you can call up the following displays in turn by scrolling the left thumbwheel on the multi-function steering wheel:
- Time and date link►
- Digital speedometer*
- Average fuel consumption
- Range*
- Short-term memory summary
- Long-term memory summary
- Energy consumers* link►
- Driver assistance* link►
- Traffic sign recognition* link►
The short-term memory collects the information on a journey from the time the ignition is switched on until it is switched off. If the journey is resumed within two hours after the ignition is switched off, the new figures are automatically included in the calculation.
Unlike the short-term memory, the long-term memory is not erased automatically. In this way, you can determine the period for which you wish the on-board computer to supply driving information.
Fuel consumption
The current fuel consumption can be shown in a bar display
Fig. 14►.
The average fuel consumption from the short-term memory can also be displayed. When the bar is green or the grey colour of the bar changes (depending on which equipment is fitted), the following function is saving fuel:
- Recuperation: Electrical energy can be stored in the battery (recuperation) if the vehicle is travelling downhill or coasting in gear (overrun). In this case, the bar will move towards the / symbol.
Note
The date, the time and the time/date display format can be changed via the infotainment system link►.