Applies to: vehicles with Audi connect vehicle control services and auxiliary heating
You can use this service to control the air conditioning remotely:
- Start/finish the air conditioning cycle.
- Program a timer.
- Activate/deactivate a timer.
Important
- You will require the 4-character PIN which you set during the verification process at my.audi.com.
- The ignition must be switched off to start/end the air conditioning process.
For more information, please refer to link►.
WARNING
- Before using the air conditioning functions please ensure that your vehicle is properly parked and that the ignition is off.
- The auxiliary heating must not be allowed to run when the vehicle is in a confined space because it can give off toxic fumes.
- To avoid any possible fire risk, never have the auxiliary heating switched on when refuelling the vehicle.
- Because of the high temperatures which occur when the auxiliary heating is running, make sure when parking the car that the exhaust outlet under the car is not obstructed in any way and that the exhaust gases do not come into contact with flammable materials (fire risk).
Note
- The auxiliary heating/ventilation system heats/cools the interior to the temperature you last selected on the air conditioner link►.
- It is advisable to open the air outlets on the dashboard when using the auxiliary heating/ventilation.
- At low outside temperatures, some visible water vapour may form in the engine compartment. This is no cause for concern.