Audi Q5s which do not have a factory-fitted towing bracket* have a towline anchorage on the right side of the rear bumper.
Audi Q5s with towline anchorage
Take the towline anchorage out of the Audi Q5's tool kit Link.
To detach the cover cap from the bumper, firmly press the lower part of the cap inwards to release it Fig. 1.
Screw the towline anchorage firmly all the way into the screw connection Fig. 2.
Audi Q5s with towing bracket*
Swivel out the towing bracket Link.
Attach the towbar or the towrope to the towing bracket.
After use, unscrew the towline anchorage and put it back in the toolbox. Fit the cover cap in the bumper. The towline anchorage should always be kept in the Audi Q5.
Audi Q5s which have a factory-fitted towing bracket* do not have a screw connection at the rear for the towline anchorage.
WARNING!
- If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing (accident risk).
- If your car has a towing bracket*, please use only special tow bars with suitable attachments (i.e. tow bars which are specially designed for use with towing brackets) to avoid damage to the coupling equipment.
- If your car has a towing bracket*, please use only special towing ropes (risk of accident).