Where not otherwise indicated or separately listed, all technical data apply to Audi Q3s with standard equipment for the German market. Other figures may apply for special versions and export models.
Please note that the details listed in the Audi Q3's registration documents can be taken as correct.
Engine data
The figures for engine power output are determined according to EU standards.
Performance figures
The performance figures were measured without equipment which may influence performance, such as mudflaps or extremely wide-section tyres.
Weights
These figures (kerb weight according to the currently applicable version of EU Directive 92/21/EEC) apply to the Audi Q3 with the tank 90% full, with no special equipment. The figures include an additional 75 kg to allow for the weight of the driver and luggage.
When towing, the gross Audi Q3 weight may be exceeded (for specifications refer to Link) and the maximum rear axle weight may be exceeded by up to 70 kg.
Maximum trailer weights
The maximum trailer weights are calculated in accordance with the currently applicable version of EU Directive 92/21/EEC.
Maximum draw bar loading
The vertical load exerted by the trailer drawbar on the ball joint of the towing bracket must not exceed 80 kg.
In the interest of safety, we recommend applying the maximum permitted draw bar weight. The stability of the trailer could be adversely affected if too little weight is applied.
If the maximum permitted drawbar weight cannot be obtained, e.g. when using small or light trailers, statutory regulations require that the drawbar weight be at least 4% of the actual trailer weight (for single-axle trailers or twin-axle trailers with an axle spacing less than 1.0 m).