The front towline anchorage is only mounted if the Audi Q3 has to be towed.
The screw connection for the towline anchorage is located behind a cover on the right side of the front bumper.
Take the towline anchorage out of the Audi Q3 tool kit Link.
Carefully remove the cover by pulling in the direction indicated Fig. 1.
Screw the towline anchorage securely into the screw connection as far as it will go Fig. 2 and tighten it with the box spanner.
Put the towline anchorage back in the tool kit after use.
When refitting the cover, first insert the lugs on the cover into their mountings in the area of the radiator grille. Then insert the opposite side of the cover and press it firmly into the mountings Fig. 1.
WARNING!
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!