- Fig. 1 Ignition lock: Ignition key positions
Applies to Audi Q3s: with ignition lock
Switching off the engine
Stop the Audi Q3.
Turn the ignition key to position -0-.
The steering lock acts as a theft deterrent.
- Never switch off the engine until the Audi Q3 is stationary. Otherwise you may not have the full benefit of the brake servo and power steering. You may need more strength to steer and brake the Audi Q3 than you normally would. This would mean a greater risk of accidents and serious injury, because you cannot steer and brake in the normal manner.
- Never remove the key from the ignition while the Audi Q3 is moving. This would cause the steering lock to engage and you would no longer be able to steer the car.
- Always take the key with you when you leave the Audi Q3. Otherwise the engine can be started or power-operated equipment such as the electric windows can be used. This could result in serious injury.
Caution!
If the engine has been working hard for a long time, there is a risk of heat building up in the engine compartment after the engine has been switched off; this could cause engine damage. For this reason, you should leave the engine idling for about 2 minutes before switching it off.
Note
After the engine is stopped the radiator fan may run on for up to 10 minutes, even if the ignition is switched off. The fan may also start running again after some time if the coolant temperature rises due to a build-up of heat, or if the engine is hot and the engine compartment is heated up further by direct sunlight.