If any items of luggage do not fit under the luggage compartment covers when loading the car, take out the covers -3- and -4- WARNING!.
Removing
To remove the cover from the boot lid -3-, pull the fasteners -1- off the studs Fig. 1. You can now pull the cover out of the retainers -2- in the direction of the arrows.
To remove the cover in the luggage compartment -4-, pull it towards the rear Fig. 2.
Installing
To secure the cover -3- on the inside of the boot lid, slide it into the retainers -2-.
Press the fasteners -1- onto the studs WARNING!.
To secure the cover -4- in the luggage compartment, engage it in the side trim on both sides. You can now push the cover forwards until it engages.
- Make sure that both luggage compartment covers are securely engaged after loading or unloading the Audi Q3.
- The luggage compartment cover must always be fixed properly – risk of accident!
- The luggage compartment cover should not be used as a storage shelf. Items placed on this cover could cause injury in an accident or if the brakes are applied suddenly.