- Fig. 1 Automatic anti-dazzle interior mirror
Your Audi Q3 is equipped with a manual or automatic* anti-dazzle interior mirror.
Manual anti-dazzle interior mirror
Pull the lever at the bottom of the mirror towards you.
Automatic anti-dazzle mirrors
Press button -A- Fig. 1 to activate the anti-dazzle setting on the interior mirror and the exterior mirror on the driver's side*. The LED -B- will light up. The interior and exterior mirrors* will darken automatically when bright light (e.g. from the headlights of a following Audi Q3) shines on the surface of the interior mirror.
WARNING!
Electrolyte fluid can leak from a broken automatic anti-dazzle mirror. This fluid can cause irritation to the skin, eyes, and respiratory organs. Wash thoroughly with clean water should you come into contact with this fluid. Seek medical assistance if needed.
Caution!
Electrolyte fluid can leak from a broken automatic anti-dazzle mirror. This fluid can damage plastic surfaces and paintwork. Use a wet sponge or similar to remove the fluid as soon as possible.
Note
- The automatic anti-dazzle mirrors may not function as intended if the light falling on the surface of the interior mirror is obstructed (e.g. by the sun blind*).
- The automatic anti-dazzle mirrors do not darken if the interior lighting is on or the car is in reverse gear.