-
- Fig. 1 Left side of vehicle: Installing headlight
-
- Fig. 2 Left headlight: Securing screws and headlight catch
Applies to vehicles: with xenon headlights
Make sure that the ignition and the lights are switched off.
Carefully insert the headlight part of the way and plug the connector back in.
Slide the headlight into the guides -A-. When installing the headlight, ensure that the mountings on the headlight are located between the washers -B-.
Pull up the headlight catch -D- Fig. 2 and slide the headlight into its original position so that it is flush with the adjacent body parts and securely seated.
Tighten the three screws Fig. 2.
Press the trim panel downwards in the area near the headlight until you feel it click into place.
Caution!
Take particular care not to damage or scratch the adjacent parts of the body when removing or installing the headlights.