The settings for the graphic display and acoustic signals are controlled via the MMI.
Select: Function selector button CAR > control button (Car)* Systems > Driver assist > Parking aid > control button Settings.
Display
on* - The graphic display (parking system plus) or the reversing camera image (parking system plus with reversing camera*) will be displayed when the parking aid is activated.
off - The parking aid gives only acoustic warning signals when it is activated.
Warning beeps
Front volume - Volume of the front sensors
Front frequency - Frequency of the front sensors
Rear volume - Volume of the rear sensors
Rear frequency - Frequency of the rear sensors
In-car entertainment fader - The volume of the current audio or video source is reduced when the parking aid is switched on.
You will hear a short test tone each time you make a new setting.
Note
- You can also change the warning beep settings directly from the graphic display or reversing camera* picture. Simply press the control button for Settings.
- New settings are not activated until you switch on the parking aid again.
- The settings will be automatically stored and assigned to the remote control key.