Applies to vehicles: with head-up display
The head-up display projects certain warnings and selected information
from driver assist functions* and the
navigation system* onto the windscreen.
The display appears within the driver's field of vision.
Switching on/off
To switch the head-up display on/off, press the
[a328] button
Fig. 2.
Height adjustment
The height of the head-up display can be adjusted to your individual
requirements.
Sit in the correct position in your seat
Link.
Turn the [a328] button to
adjust the display.
Changing settings in the MMI
Select: Function selector button CAR
> control button (Car)*
Systems > Driver assist
> Head-up display >
Head-up display contents or
Brightness.
Display contents
The settings in the MMI allow you to specify which information
is shown in the display:
- Cruise control system*
- Navigation information*
- Audi adaptive cruise control*
- Audi active lane assist*
- night vision assist* (pedestrian warning)
The display of the speed and some of the red warning lamps cannot
be deactivated in the MMI.
Brightness
You can adjust the brightness of the display in the MMI. In
addition, the display brightness is reduced automatically as
the daylight starts to fade. The basic level of brightness is
determined by the instrument lighting setting
Link.
Caution!
Do not place any objects over the opening for the head-up display
to avoid scratching the glass cover.
Note
- The display may be harder to see in unfavourable light conditions or if you are wearing polarised sunglasses.
- Vehicles with seat memory*: Your settings for the head-up display are stored automatically and assigned to the remote control key currently in use.
- A special windscreen is required for the head-up display.