Applies to vehicles: with car telephone kit or phone pre-installation
Important: Telephone mode* must be activated
Link.
When you connect a mobile phone or insert a SIM card, the contacts
on the mobile phone or the SIM card will be imported automatically.
The contacts are displayed in alphabetical order; they can be sorted
according to first name/surname
Link and are displayed together with a symbol indicating where
they are stored
Fig. 1.
-1- | Local MMI memory (public) |
-2- | Local MMI memory (private) |
-3- | SIM card |
-4- | Mobile phone |
Note
- Which contacts are displayed on the MMI depends on the mobile phone you are using.
- If the SIM card is inserted in the handset* or the SIM card reader* Link, the SIM card entries and the contacts in the local MMI memory (public) are displayed.
- In certain cases, contacts from a mobile phone may not be transmitted in alphabetical order. Due to the limited memory capacity, contacts with certain initial letters may not be displayed on the MMI system if there are too many entries.
- Please pay attention to any synchronisation queries on your mobile phone.