To show the available options on the MMI display, turn the rotary pushbutton
to Options and press it while you are speaking
on the phone, or
Press the Options control button.
Hold/Resume
The Hold and
Resume options allow you to hold a call and retrieve it later
from the hold queue. On hold appears
in the display, together with the amount of time the call has been
on hold.
To end a call that is on hold, press the control button for
End call.
Placing a further call (Dial)
First place the active call on hold by pressing the control button
for Options and selecting
Hold. Then turn the rotary pushbutton
to Further call and press the rotary
pushbutton to call up the main telephone functions. You can enter
a phone number via the option Enter number
or select a number from a call list
Link. Select OK or
Dial to start dialling.
Press the control button for End call
to end whichever call is active. If you placed a call on hold earlier
on, that call will remain on hold. You can end the call that is
on hold by pressing the control button for
End call again.
Switch microphone on/off
Your caller cannot hear your private conversations when the microphone
is off. You can still hear the caller.
Switch
You can switch between two phone calls (one of them will be on hold
at any given time). The MMI display shows the active call, the call
on hold and the length of time for the connection.
Press the control button for End call
to end whichever call is currently active. The call on hold will
remain in the hold queue and can be continued by pressing the control
button for Options and selecting
Resume.
Join conference
Up to six callers can take part in a conference (depending on the
network service and mobile phone contract).
Select Join conference to set up a
conference. The call on hold and the active call are added to the
conference.
To set up a further call, select Hold
to place all the members of an existing conference on hold. Then
turn the rotary pushbutton to Further call
and press the rotary pushbutton to call up the main telephone functions.
You can enter a telephone number via the speller or select it from
a call list
Link. Select OK or
Dial to start dialling. To add this
caller to the existing conference, select
Join conference.
Select Resume if you would like to
retrieve all callers of an existing conference from the hold queue.
The Show conference participants option
allows you to display the callers.
Note
- The option Call waiting must be activated on your mobile phone for you to be made aware of incoming calls during a conversation.
- The options available during a call may vary depending on the mobile network service provider and the mobile phone you are using. For more information, contact your mobile network service provider or refer to the operating instructions for your mobile phone.