To change the bulbs, you must remove the rear light. Removing the light requires a certain degree of practical skill.
The description for changing the bulb refers to the left rear light unit; the procedure for the right rear light unit is similar.
Check which of the bulbs is defective.
Release the trim at the side -1- Fig. 1 and pull it towards the rear -2-.
Remove the trim.
Remove the two securing screws using the Torx screwdriver (from the vehicle's tool kit).
Carefully slide the removal wedge -3- Fig. 2 (from the vehicle's tool kit) into the gap between the body and rear light Caution!.
Gradually ease out the rear light by pulling alternately in direction of arrows -1- and -2- Fig. 2.
Unplug the electrical connector.
When removing or installing the rear light, take care not to cause any damage.
- Removing the rear light in particular can lead to the paintwork or rear light becoming damaged. This is another reason why we recommend having the bulbs changed by a qualified workshop.
- NEVER use metal tools (e.g. a screwdriver) or sharp or pointed plastic tools to lever out the rear light - risk of damaging the paint.
Note
Make sure you have a soft cloth ready to place under the glass on the rear light, to avoid any scratches.