- Fig. 1 Positions of securing points (viewed from above)
- Fig. 2 Positions of securing points (side view)
The vehicle can be retrofitted with a towing bracket.
If a towing bracket is to be fitted after the car is purchased, this must be done according to the instructions of the towing bracket manufacturer. The towing bracket is bolted to the vehicle body on the inside of the spare wheel well. The securing points are marked with an -A- Fig. 1 and Fig. 2.
Audi dealers are familiar with the method of installation and any modifications which may be required for the cooling system.
WARNING!
If a towing bracket is retrofitted, the installation should be carried out by a qualified workshop.
- If the towing bracket is incorrectly fitted, this could cause a safety risk.
- For your own safety, please observe the instructions provided by the manufacturer of the towing bracket.
Caution!
If the connector socket is not fitted correctly, this could cause damage to the vehicle's electrical system.