Trailer stabilisation helps to reduce the risk of the vehicle skidding when towing a trailer.
The trailer stabilisation system1) is operational only when the ESC is switched on and there is no malfunction in the ESC Link.
When is the trailer stabilisation system activated?
Trailer stabilisation is active when the following requirements are met:
- The ESC must not be switched to sport mode Link.
- The trailer connector must be properly secured in the vehicle socket.
- The vehicle speed must be higher than approx. 65 km/h.
How trailer stabilisation works
In many cases, the driver can stabilise a swaying trailer by manually braking the vehicle.
However, if the ESC detects that the trailer is swaying and this is affecting the towing vehicle while you are driving above 65 km/h, it will automatically brake the vehicle in order to stabilise the trailer. The indicator lamp 
will flash in the instrument cluster. If possible, do not turn the steering wheel at this stage.
will flash in the instrument cluster. If possible, do not turn the steering wheel at this stage.In order to warn traffic behind you, the brake lights will come on during this automatic braking operation.
A trailer with a light load may sway quite considerably without the trailer stabilisation system intervening.
If the system for activating the trailer brake lights is defective, this will be indicated in the instrument cluster display Link.
Requirements for correct functioning of the trailer stabilisation system
If these conditions are not met in full, the trailer stabilisation system will only intervene to a limited extent or may have no effect at all WARNING!.
- The electrical connection between the towing vehicle and the trailer must be functioning correctly, without any defects.
- The load on the trailer must be properly secured.
- The tyre pressures on both the vehicle and the trailer must be adapted to the load that is being carried.
- Where possible, operate the trailer with the maximum permitted draw bar weight.
- The trailer overrun brake must be set correctly. This is important to ensure that the trailer can be braked correctly, to avoid the vehicle and trailer "jack-knifing" and to prevent excess braking of the trailer.
- At low outside temperatures, both the towing vehicle and the trailer should be fitted with winter tyres.
It is essential that you adjust your speed to suit the weather, road and traffic conditions. Do not let the trailer stabilisation system tempt you into taking any risks when driving – this can cause accidents.
- The ESC and trailer stabilisation system cannot defy the laws of physics. This should be kept in mind, particularly on slippery and wet roads and when towing a trailer with a light load.
- The trailer stabilisation system is functional, regardless of whether the trailer has a mechanical overrun brake or not.
- The trailer stabilisation system is not always able to detect swaying of trailers with a light load.
- A trailer can still "jack-knife" on slippery roads with little grip, even if the towing vehicle is equipped with the trailer stabilisation system.
- Trailers with a high centre of gravity may even tip over before they start to sway sideways.
- If you are not towing a trailer, but the trailer socket is being used (e.g. for an illuminated bicycle rack), the trailer stabilisation system may be activated in extreme driving conditions.
- Please note the additional information and warnings Link.
1) Not available on vehicles for some markets.