- Fig. 1 Wheel housing liner (front): Access to the dipped headlight bulb
- Fig. 2 Bulb carrier for dipped headlights
Applies to vehicles: with halogen headlights
The description for changing the bulb refers to the left headlight; the procedure for the right headlight is similar.
Removing cover in wheel housing liner
Turn the steering all the way to the right.
Take the screwdriver out of the vehicle tool kit Link. Use the flat-blade side of the reversible screwdriver insert.
Use the screwdriver to lever off the cover Fig. 1.
Removing bulb carrier
Pull the second cover off the headlight housing WARNING!.
Turn the connector with the bulb Fig. 2 anti-clockwise in the direction of the -arrow- and take it out of the headlight housing.
Changing a bulb
Pull the connector off the defective bulb.
Do not touch the glass part of the new bulb with your bare hands, use a cloth or paper towel instead.
Press the new bulb into the connector.
Fit the connector with the new bulb into the headlight housing. Ensure that the lugs are correctly positioned in the mountings on the reflector neck.
Turn the connector as far as possible in clockwise direction.
Press the rubber cap onto the headlight housing.
Press the cover into the wheel housing liner until you feel it engage. It must be flush all around.
Check whether the new bulb is working.
Have the headlight settings checked.