What you must do after changing a wheel.
Put the tools and the jack* back in the luggage compartment.
The defective wheel will not fit in the spare wheel well. You should therefore stow it in the luggage compartment, and secure it in place Link.
The inflation pressure of the newly fitted spare tyre must be checked as soon as possible.
Have the tightening torque of the wheel bolts checked as soon as possible with a torque wrench. The correct tightening torque is 120 Nm.
Have the flat tyre replaced as quickly as possible.
Note
- If you notice that the wheel bolts are corroded and difficult to turn when changing a wheel, they must be replaced before having the tightening torque checked.
- In the interest of safety, drive at moderate speeds until the tightening torque of the wheel bolts has been checked.
- After changing a wheel on vehicles with tyre pressure monitoring system, the inflation pressures of all four tyres must be checked/corrected and stored on the MMI Link.