The launch control programme gives you optimum acceleration when starting from a standstill.
Important: The engine must be warm and the steering wheel must be pointing straight-ahead.
Briefly press the 
OFF button Link while the engine is running. The indicator lamp 
will light up and the message Warning! Restricted stability will appear on the driver information system display.
OFF button Link while the engine is running. The indicator lamp will light up and the message Warning! Restricted stability will appear on the driver information system display.
Briefly pull the selector lever back from position D/S to select sport mode (S) or select DYNAMIC mode in Audi drive select Link.
Press the brake pedal firmly with your left foot and hold it down for at least one second.
At the same time, press the accelerator all the way down with your right foot until the engine revs are high and steady.
Take your foot off the brake within 5 seconds WARNING!.
- Always adapt your driving style to the traffic conditions.
- Only use the launch control programme when road and traffic conditions permit, and make sure your manner of driving and accelerating the vehicle does not inconvenience or endanger other road users.
- Please note that, when the sport mode is switched on, the driven wheels may start to spin, causing the vehicle to lose grip, in particular on slippery or wet roads - danger of skidding!
- When acceleration has been completed, you should deactivate the sport mode again via the OFF button.
Note
- The gearbox may be hot after you have used the launch control programme. In this case, the programme may not be available for several minutes. The programme will be available again after a cool-down period.
- Accelerating with the launch control programme places a heavy load on all parts of the vehicle. This can result in increased wear and tear.