- Fig. 1 Luggage compartment: Floor panel in upright position
- Fig. 2 Luggage compartment: Removing floor panel
Dirty or damp items can be stored beneath the floor panel.
Placing in an upright position
Take hold of the handle -A- Fig. 1, lift the floor panel into an upright position and insert the edge of the floor panel into the recess -B-.
Removing and installing
To remove the floor panel, pull the complete panel towards the rear of the vehicle and out of the guide rails Fig. 2.
To install the floor panel, insert it at the front of the guide rails and push it towards the backrests as far as the stop.
If you would like to remove the dirt tray, lift it out by the handle.
WARNING!
Objects weighing more than 7.5 kg must not be transported beneath the floor panel. Objects may not exceed 2/3 of the height of the upright floor panel - risk of injury! The objects must be suitably secured.