The data stored in the driver information system -B- is presented
in different display tabs -A-
Fig. 1. The
following information may be displayed, depending on the vehicle
equipment:
| -A- |
-B- |
|---|---|
| 1st tab |
Vehicle functions: |
| On-board computer Link |
|
| Digital speedometer |
|
| Efficiency programme*
Link |
|
| Cruise control system*
Link |
|
| Audi adaptive cruise control*
and Audi braking guard* Link |
|
| Audi active lane assist*
Link |
|
| Speed limit display
Link |
|
| Easy-view display |
|
| 2nd tab |
Warning/indicator lamps and driver messages |
| Warning if one of the doors, bonnet or
boot lid is not closed |
|
| Service interval display Link |
|
| Speed warning Link |
|
| 3rd tab |
Night vision assist*
Link |
| 4th tab |
Audio/video |
| 5th tab |
Telephone* |
| 6th tab |
Navigation* |
The second and third tabs are only visible if one or more warning/indicator
lamps or driver messages is displayed or if the relevant system
is switched on.
The status line -C-
Fig. 1 appears
at the bottom of the display. The outside temperature, time, selector
lever position, trip recorder and overall mileage recorder are displayed
here permanently.
Do not rely on the outside temperature display as an ice warning.
Please bear in mind that there may be patches of ice on the roads
even at outside temperatures around +5°C – risk of accident!
Note
- You can change the measurement units for temperature or speed, etc. on the MMI.
- When the vehicle is stationary or travelling at very low speeds, the temperature displayed may be slightly higher than the actual outside temperature as a result of the heat radiated from the engine.
- At temperatures below +5°C a snowflake symbol appears next to the temperature display WARNING!.
- For information on how to operate the audio/video and navigation* functions, please refer to the separate MMI Operating Manual.