The following requirements must be met before you can establish a connection between the car telephone kit and your mobile phone:
- The vehicle must be stationary, and the ignition must be switched on.
- Bluetooth and access to your SIM card (SIM Access) must be activated on your mobile phone.
- The Bluetooth discoverability option on your mobile phone must be switched on.
- The mobile phone you would like to connect must not be connected actively to any other Bluetooth device.
Overview: Bonding Bluetooth-capable devices
The mobile phone must be bonded to your car telephone kit (this only has to be done once). This procedure involves various steps, depending on the mobile phone you are using:
1. Switch on the car telephone kit
Link .
2. Search for Bluetooth devices within range Link.
3. Check which of the following Bluetooth profiles is supported by your mobile phone and bond your mobile phone accordingly: either via the SIM Access Profile
Link or via the Handsfree Profile
Link .
Watch the display on your mobile phone and follow any instructions.
Note
- You can bond several mobile phones to the car telephone kit; however only one connection is active at a time.
- To optimise the network response you can choose between three different telephone modes in the settings of your car phone Link.
- For up-to-date information on how to bond mobile phones to the car telephone kit, please see the Internet (e.g. www.audi.com/bluetooth) or contact an Audi dealer.